TCP State Machine

TCP STATE MACHINE:
==================

The Simplified TCP Finite State Machine

In the case of TCP, the finite state machine can be considered to describe the “life stages” of a connection. Each connection between one TCP device and another begins in a null state where there is no connection, and then proceeds through a series of states until a connection is established. It remains in that state until something occurs to cause the connection to be closed again, at which point it proceeds through another sequence of transitional states and returns to the closed state.

The full description of the states, events and transitions in a TCP connection is lengthy and complicated—not surprising, since that would cover much of the entire TCP standard. For our purposes, that level of detail would be a good cure for insomnia but not much else. However, a simplified look at the TCP FSM will help give us a nice overall feel for how TCP establishes connections and then functions when a connection has been created.

Table 151 briefly describes each of the TCP states in a TCP connection, and also describes the main events that occur in each state, and what actions and transitions occur as a result. For brevity, three abbreviations are used for three types of message that control transitions between states, which correspond to the TCP header flags that are set to indicate a message is serving that function. These are:

• SYN: A synchronize message, used to initiate and establish a connection. It is so named since one of its functions is to synchronizes sequence numbers between devices.
  
• FIN: A finish message, which is a TCP segment with the FIN bit set, indicating that a device wants to terminate the connection.
  
• ACK: An acknowledgment, indicating receipt of a message such as a SYN or a FIN.

Again, I have not shown every possible transition, just the ones normally followed in the life of a connection. Error conditions also cause transitions but including these would move us well beyond a “simplified” state machine. The FSM is also illustrated in Figure 210, which you may find easier for seeing how state transitions occur.

Table 151: TCP Finite State Machine (FSM) States, Events and Transitions

State	State Description	Event and Transition
CLOSED	This is the default state that each connection starts in before the process of establishing it begins. The state is called “fictional” in the standard. The reason is that this state represents the situation where there is no connection between devices—it either hasn't been created yet, or has just been destroyed. If that makes sense. J	Passive Open: A server begins the process of connection setup by doing a passive open on a TCP port. At the same time, it sets up the data structure (transmission control block or TCB) needed to manage the connection. It then transitions to the LISTEN state.
		Active Open, Send SYN: A client begins connection setup by sending aSYN message, and also sets up a TCB for this connection. It then transitions to the SYN-SENT state.
LISTEN	A device (normally a server) is waiting to receive a synchronize (SYN) message from a client. It has not yet sent its own SYN message.	Receive Client SYN, Send SYN+ACK: The server device receives a SYNfrom a client. It sends back a message that contains its own SYN and also acknowledges the one it received. The server moves to the SYN-RECEIVED state.
SYN-SENT	The device (normally a client) has sent a synchronize (SYN) message and is waiting for a matching SYN from the other device (usually a server).	Receive SYN, Send ACK: If the device that has sent its SYN message receives a SYN from the other device but not an ACK for its own SYN, it acknowledges the SYN it receives and then transitions to SYN-RECEIVEDto wait for the acknowledgment to its SYN.
		Receive SYN+ACK, Send ACK: If the device that sent the SYN receives both an acknowledgment to its SYN and also a SYN from the other device, it acknowledges the SYN received and then moves straight to theESTABLISHED state.
SYN-RECEIVED	The device has both received a SYN (connection request) from its partner and sent its own SYN. It is now waiting for an ACK to its SYN to finish connection setup.	Receive ACK: When the device receives the ACK to the SYN it sent, it transitions to the ESTABLISHED state.
ESTABLISHED	The “steady state” of an open TCP connection. Data can be exchanged freely once both devices in the connection enter this state. This will continue until the connection is closed for one reason or another.	Close, Send FIN: A device can close the connection by sending a message with the FIN (finish) bit sent and transition to the FIN-WAIT-1state.
		Receive FIN: A device may receive a FIN message from its connection partner asking that the connection be closed. It will acknowledge this message and transition to the CLOSE-WAIT state.
CLOSE-WAIT	The device has received a close request (FIN) from the other device. It must now wait for the application on the local device to acknowledge this request and generate a matching request.	Close, Send FIN: The application using TCP, having been informed the other process wants to shut down, sends a close request to the TCP layer on the machine upon which it is running. TCP then sends a FIN to the remote device that already asked to terminate the connection. This device now transitions to LAST-ACK.
LAST-ACK	A device that has already received a close request and acknowledged it, has sent its own FIN and is waiting for an ACK to this request.	Receive ACK for FIN: The device receives an acknowledgment for its close request. We have now sent our FIN and had it acknowledged, and received the other device's FIN and acknowledged it, so we go straight to the CLOSED state.
FIN-WAIT-1	A device in this state is waiting for an ACK for a FIN it has sent, or is waiting for a connection termination request from the other device.	Receive ACK for FIN: The device receives an acknowledgment for its close request. It transitions to the FIN-WAIT-2 state.
		Receive FIN, Send ACK: The device does not receive an ACK for its ownFIN, but receives a FIN from the other device. It acknowledges it, and moves to the CLOSING state.
FIN-WAIT-2	A device in this state has received an ACK for its request to terminate the connection and is now waiting for a matching FIN from the other device.	Receive FIN, Send ACK: The device receives a FIN from the other device. It acknowledges it and moves to the TIME-WAIT state.
CLOSING	The device has received a FIN from the other device and sent an ACK for it, but not yet received an ACK for its own FIN message.	Receive ACK for FIN: The device receives an acknowledgment for its close request. It transitions to the TIME-WAIT state.
TIME-WAIT	The device has now received a FIN from the other device and acknowledged it, and sent its own FIN and received an ACK for it. We are done, except for waiting to ensure the ACK is received and prevent potential overlap with new connections. (See the topic describing connection termination for more details on this state.)	Timer Expiration: After a designated wait period, device transitions to theCLOSED state.

Figure 210: The TCP Finite State Machine (FSM)

This diagram illustrates the simplified TCP FSM.